Rampage Trailview Tonneau Top Instrucciones De Instalación página 6

Installation Steps
Using a Torx T25 bit to remove the foot man loop from the windshield on
both the driver's and passenger's side. Save screws for re-use.
19
Fold back the hardware tubes of the header channel assembly then install
the main deck fabric. Secure with snaps as shown.
21
Tuck the plastic strip behind metal tabs and along side rails. Plastic strip will
tuck between the metal sides.
23
Roll up the Soft Top Deck to make installation to the Flip Top Plates more manageable.
25
TIP: It may be helpful to have a second person for this step. Place the top face down and re-fold, beginning with the rear portion.
Place provided latch as shown and reattach with the Torx T25 screw from
the previous step. Repeat Step 19, 20 for the other side.
20
Tuck the plastic strip behind latches. and along side rails. See photo
below for proper fit.
22
Secure the Flip Top Header Assembly to the Soft Top Deck by engaging the
Hook and loop flap around the tube.
24
6