Interrupting Operation; Care And Maintenance; Transportation; Storage - Kärcher K2 Follow Me Cordless Manual Del Usuario

Operation with detergent
Note
Before you use the detergent, please read
the material data safety sheet issued by the
detergent manufacturer carefully (especial-
ly the instructions regarding personal pro-
tective equipment).
If the detergent is needed for cleaning,
please equip the trigger gun with the origi-
nal foam nozzle with detergent container.
Do not add the detergent direct into the wa-
ter tank.
Recommended cleaning method
1. Spray the detergent sparingly on the dry
surface, and allow the detergent to re-
act, but not to dry.
2. Spray off loosened dirt with the high
pressure.

Interrupting operation

1. Release the lever on the trigger gun.
2. Lock the lever on the trigger gun.
3. In the event of a longer interruption (e.g.
more than 5 minutes), switch the appli-
ance off.
Finishing the operation
Note
Separate the high-pressure hose from the
trigger gun or the appliance when there is
no pressure in the system.
1. Remove the water tank.
2. Switch the appliance on.
3. Push the lever of the trigger gun until no
more water is emitted.
4. Release the lever on the trigger gun.
5. Switch the appliance off.
6. Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.
7. Lock the lever of the trigger gun.
8. Empty the water tank completely.

Care and maintenance

Before doing any work on the appliance:
1. Switch off the appliance.
2. Disconnect the battery charger.
Cleaning the sieve in the water
connection regularly
Note
Do not damage the sieve.
1. Remove the coupling from the water
connection.
Illustration K
2. Pull the sieve out using the flat pliers.
Illustration L
3. Clean the sieve under running water.
Illustration M
4. Reinsert the sieve into the water con-
nection.

Transportation

Note
Consider the weight of the appliance when
storing it.
When transporting the appliance by
1. Wind the high-pressure hose around the
hose, and put them in the storage holder
for the hose.
2. Insert the trigger gun in the storage hold-
er for the trigger gun.
3. Fold the water tank.
4. Lift up the appliance by the carrying belt,
and carry it.
When transporting the appliance in
Secure the appliance against shifting and
tipping over.
Note
Consider the weight of appliance when
storing it.
Prior to extended storage periods (for ex-
ample, during the winter), also observe the
instructions in the care and maintenance
section.
1. Place the appliance on an even surface.
2. Attach the accessories by type to the ap-
pliance.
English
hand
vehicles

Storage

25