Information And General Rules; Explanation Of Symbols; Identification Data; Marking And Identification - NIBBI BRIK 1 Uso Y Mantenimiento

INFORMATION
AND GENERAL RULES
SPARE PARTS - You are highly
recommended to use only GENUINE
SPARE PARTS. Orders must be made
observing the rules given in the Spare
Parts Catalogue.
ENGINE SERVICING - The regulations
for using and servicing the engine
are given in the appropriate booklet,
a copy of which is provided with each
machine.
NOTE - The terms RIGHT and LEFT
used in this manual to locate the various
components always refer to the normal
travel direction of the vehicle, that is to
the machine seen by the operator in the
driver's position and with the Mower
mounted as an accessory of normal
use.
The abbreviation 1+1 indicates the model
with two gears, one forward and one
reverse.
The abbreviation 2+2 indicates the
model with four gears, two forward and
two reverse.

EXPLANATION OF SYMBOLS

Throttle Control
Clutch control
Direction of travel
CE PLATE

MARKING AND IDENTIFICATION

The Machine's serial number is printed
on the top of the gearbox. The "CE" mark
on the column support.
On receiving the machine check for the
CE label.

IMPORTANT!

Whenever requesting technical service
or ordering spare parts, always give
the serial number of the machine in
question.
32
SERIAL NUMBER