Technical Data; Fitting The Wheels; Controls - NIBBI BRIK 1 Uso Y Mantenimiento

TECHNICAL DATA

Motor Cultivator type
Petrol engine
Diesel engine
Recoil starter
Motorstop
Dry disc clutch
Motor Cultivator version gearbox
Mower version gearbox
Adjustable handlebars:
6 vertical positions, 3 horizontal positions
Wheels with fixed disc tyres
Metal wheels
Weight with CA24 engine and Mower cm.
Gewicht met CA24 motor en 90 cm. maaibalk
X= AVAILABLE

FITTING THE WHEELS

After removing the machine from its packing, mount the wheels taking care that the
drive key is fitted correctly in the wheel axle seat.
The arrow shown on the tyre wheel must be turned towards the engine for the
Motorcultivator version and towards the P.T.O. for the front implement version.
Before start-up, carefully read the Operating and Servicing handbook of both engine
and machine.
CONTROLS (Fig. 9A - 9B )
1.Engine stop lever
2.Clutch control lever
3.Handlebar vertical lock lever
4.Steering column horizontal lock lever
5.Forward and reverse gear
control lever
6.Throttle control lever
7.P.T.O. control lever
8.Gear control lever (per 2+2)
/ = NOT AVAILABLE
1 + 1
X
/
X
X
X
1 MA + 1 RM
1 MA + 1 RM
REVERSIBLE 180°
X
X
cm. 50 = 74 Kg
70 Kg
Fig 9A
Fig 9B
34
2 + 2
X
X
X
X
X
2 MA + 2 RM
2 MA + 2 RM
X
X
cm. 60 = 77 Kg
72 Kg