Matrix T-DPT Manual Del Usuario página 4

Red Hardware Bags (x2)
3
Description Qty
C Bolt 4
Note:
Do not fully tighten hardware
until the end of step 5.
Step 3 Torque Value:
78.4 Nm / 57.8 ft-lb
C
6
MX15_T-DPT_TREADMILL_OM_r1_0_MULTI.indd 6-7
White Hardware Bag
4
Description Qty
D Bolt 4
Note:
Do not fully tighten hardware
until the end of step 5.
Step 4 Torque Value:
39.2 Nm / 28.9 ft-lb
D
A. Carefully pull the CABLE (1) through the
Green Hardware Bags (x2)
5
RIGHT HANDLEBAR SUPPORT using the twist
tie located inside the RIGHT HANDLEBAR
Description Qty
SUPPORT and attach to the CONNECTOR
E Bolt 4
CABLE (2) on the MAIN FRAME.
F Flat Washer 4
G Bolt 2
B. Repeat on other side.
Note:
C. Completely tighten hardware from
steps 2–5 according to the Torque
Step 5 Torque Value:
Values specified in each step.
39.2 Nm / 28.9 ft-lb
1
F
E
2
Yellow Hardware Bag
6
Description Qty
H Screw 2
G
H
7
12/17/15 8:51 AM