Achine - SUHNER MACHINING MAX 40 R CO Manual Tecnico

3. h
anDling
3.1 m

achIne

The machine is delivered adjusted with the
drive configuration specified in the order.
Keep the machine clean!
During a prolonged stop of the machine, do not
leave a tool holder in the spindle.
3.1.1 c
hangIng the drIve confIguratIon
(Z )
gIng form
Drop front sheet metal.
Loosen the screws.
30
/o
PEration
/ b -
elt exchan
By applying a 5 mm allen key anticlockwise, lower the
motor with the belt pulley.
Remove the motor pulley.
Remove the pneumatic jack and the rotating union.