Publicidad
Guide to Features (Rear panel):
1. BALANCE: Turn the balance knob upward to hear the main unit's speaker or downward to
hear the right speaker. The center detent provides equal balance between the two speakers.
2. R-SPR: Connect the RCA cable from the right speaker to this input.
3. 12VDC: Use this input to operate the Model Two from a DC power supply. Never use this DC
power input and the AC input at the same time.
4. ANTENNA SWITCH: Switch between internal and external FM antennae. This switch has no
affect on AM reception.
5. EXTERNAL FM CONNECTION: The Model Two has built-in AM and FM antennae. To improve
FM reception, slide the black plastic end of the FM antenna over this "F" connector and set
the switch to "EXTERNAL". Adjust the wire for best reception. See section marked "Reception"
for more information.
6. HEADPHONE: Connect a headset (not Included) to this stereo output for private listening. The
headphone volume will be controlled by the Model Two's volume knob. Connecting a pair of
headphones will mute the Model Two's speakers. This jack accepts a 1/8" male stereo mini plug.
7. SUB OUT: Connect a powered subwoofer to this output for enhanced bass. This jack accepts
a 1/8" male stereo mini plug.
8. AUX IN: To hear the audio from another device (CD player, digital audio (mp3) player, etc.)
through the Model Two's speakers, connect the device to this stereo input. This jack accepts
a 1/8" male stereo mini plug.
9. REC OUT: You may record from the Model Two by connecting a cassette deck or other recording
device to this fixed-level, stereo output. You may also use the Model Two as an AM/FM tuner
by connecting a receiver or integrated amplifier to this output. The Model Two's speakers will
not be muted when using this output. This jack accepts a 1/8" male stereo mini plug.
English
9
Publicidad
