Control Board - Centrometal SLIM 6 Manual Del Usuario

Control board

6
5
AL C AL F
1 4
2
1. Temperature or power decrease
2. Temperature or power increase
3. Key On/Off
4. Receiver
5. Led alarm ALC
6. Led alarm ALF
7. Led chrono-thermostat
8. Led temperature ok
9. Led pellets loading
10. Led resistance
11. Display LED 7 segments
12. Led On/Off
Display keys and functions
1. Using the key on the menu Set temperature, you
can decrease the temperature from a maximum
value of 40 °C to a minimum value of 7 °C.
With the key on the menu Set power, you can
decrease the working power from a maximum
value of 5 to a minimum value of 1.
2. Using the key on the menu Set temperature, you
can increase the temperature from a min. value of
7°C to a max. value of 40°C.
With the key on the menu Set power, you can
increase the working power from a min. value of 1
to a max. value of 5.
3. Keep the key pressed for 2 seconds to switch the
stove on or off.
4. Sensor receiving the settings of the remote
control.
5. The led blinks in the event of a malfunction or
alarm.
6. The led blinks in the event of a malfunction or
alarm.
7. This means the automatic single or daily
programming of the switching on or off of the
stove is on.
The automatic programming can be set only with
the remote control (optional).
8. This is on when the stove reaches the set
temperature. In this case you will read the word
"Eco" and the set temperature on the display.
9. This led blinks every time the stove is loading
pellets.
7 9
11
10
8
10. This led is on only while the stove is lighting up
in order to indicate that the resistance is warming
12
the air which will fire the pellets.
3
11. On the display you can read the different working
functions of the stove, the room temperature and
the set working power. In the event of a malfunction,
the display shows the relative error codes (see
paragraph on alarm codes).
12. This led indicates the different phases of the
stove:
- it is on if the stove is switched on and working
- it is off if the stove is switched off
- it blinks if the stove is switching off
Stove setting
How to change the wished room temperature
Join the following procedure to change the wished
temperature: press the key
menu and set temperature. You will read the word
"Set" and the wished temperature on the display.
Use the keys
the wished value.
The stove will leave the menu Set temperature
automatically as soon as you do not work on it for
some seconds.
AL C
1 2
How to change the working power
Join the following procedure to change the working
power: press the key
and set the working power. You will read the word
"Pot" and the range of 5 possible powers on the
display. Use the keys
reduce the wished value.
The stove will leave the menu Set working power
automatically as soon as you do not use it for some
seconds.
AL C
2
(1) once to enter the
(2) and (3) to increase or reduce
AL F
3
(1) once to enter the menu
(2) and
AL F
1 3
(3) to increase or
7