Centrometal SLIM 6 Manual Del Usuario página 47

It is necessary to daily clean the brazier
and often clean the ash box. The lack
of cleanliness can prevent the starting
of the stove, causing damages to the
stove itself and to the environment (possible
emission of unbrunt material and soot). Do
not re-use the pellet possibly remained in the
brazier due to no starting-up.
CLEANING BY THE TECHNICAL
Check every year
Clean the combustion chamber
The scraper is positioned between the bars of
the front grille. Actuate 5/6 times the scraper to
maintain the cleanliness of the tubes of exchanges.
For the extraction of the scraper use the special
fork. (photo 1)
1 1
Remove the brazier and clean it of any residue. (photo
2)
Open the door and remove the ash box.
Remove with a vacuum cleaner all the ashes deposited
inside. This operation may be performed more or less
frequently depending on the quality of pellets used.
(photo 3)
2 2
Remove the fl oor of the combustion chamber with
the help of a screwdriver and clean under the plate
with a vacuum. (photo 4+photo 5)
3 3
4 4
6 6
7 7
Remove the screws on the combustion chamber
bottom and the attachment of the chute for the
input of the pellet. (photo 9+photo 10)
9 9
5 5
Remove the beat fl ame
from its support (photo
6+photo 7). Now insert
the beat fl ame upwards
and rotate it to remove it
completely. (photo 8)
Operate again
the scraper and with
a vacuum cleaner
thoroughly clean
tube bundle.
8 8
10 10
5/6
the
19