Electrical Connections - Grifo DVEP20 Manual De Instalación, Empleo Y Mantenimiento

GB
Complaints relative to the goods must be made in writing, to GRIFO Macchine
Enalogiche S.n.c. within 15 days from receipt of delivery.
Any moving of the machine must be done by two adults holding the four support
tubes at its extremes.
Connection to the mains is done by simply inserting the plug. The corresponding wall
plug must correspond to what is set in the safety regulations.
The simplicity of the connection must not make you under evaluate the importance of
respecting general security measures for electricity. Therefore, it is important to:
 control that the mains voltage is the same as that indicated on the engine plate
 before using check the integrity of the electric cable and in case of damage it
must be replaced
 avoid leaving the cable exposed to collisions, passage of people or vehicles or
any other situation that could be a threat to its integrity
 protect the cable, plug-wall socket connection and any other electric parts from
humidity
Check that the
specifications.
Pay maximum attention when moving the machine, respecting what
is set out in current regulations and in any safety procedures.

4.3 Electrical connections

It is obligatory to connect the machine to an earthed wall plug.
The plant must be fitted with an emergency safety cutout switch.
Document
Manuale vasca e pompa
Flie name
Manuale vasca e pompa
consignment corresponds to the order
Year
2016
Page
Revision 16 of 25
0