Lubrication And Controls - Grifo DVEP20 Manual De Instalación, Empleo Y Mantenimiento

GB
The main operations of general maintenance work to be carried out are described as
follows.
The frequency of these depends on the conditions of use of the machine.
Before starting up the machine and in later on, periodically you must check the state
of lubrication of the movable parts of the machine (see par. 5.1)
A thorough cleaning of the hopper and rollers, paying attention not to wet
the engine
Oiling of all engine transmission parts
Oiling of destemmer shaft and paddle type auger supports
The elimination of oil must be done according to the current laws in the countries
where the machine is in use. During oiling operations care must be taken that the oil
does not dirty the elements that come into contact with the grapes and crushed
Any maintenance must be carried out by authorized personnel
when the machine is disconnected from the power mains.
In order to manage the machine in a correct, precise way, it is
advisable to register all maintenance work taking care to indicate the
date and type of work carried out.
A non-toxic, non-polluting detergent must be used for cleaning
operations.

6.1.1 Lubrication and controls

OPERATION
Document
Manuale vasca e pompa
Flie name
Manuale vasca e pompa
FREQUENCY
After every grape
crushing session
Monthly
Monthly
Year
2016
Page
Revision 20 of 25
0