Lubrication; Use; Preliminary Operations - Grifo DVEP20 Manual De Instalación, Empleo Y Mantenimiento

GB
The machine does not need particular servicing. Before starting it up you should
check oil levels, as indicated in chapter 6.
Before starting up the machine you must check that all moving parts have been
lubricated, then periodically you should control the state of lubrication and make any
necessary interventions. For the instructions of use see paragraph 6.1.1.
The following controls must be made before starting of every work session




In case the use of an extension cable is necessary, it is advisable to
use an electric 1.5 mm cable for lengths of up to 20 m and a 2.5 mm
cable for over 20m.
GRIFO Macchine Enologiche S.n.c. decline all responsibility for
damages to people or things caused by failure to comply to the
installation instructions set out in this section.

5.1 Preliminary operations

cleaning of the machine, taking care not to wet the engine.
Control the state of connections to the power mains.
Control that inside the machine there are no foreign bodies that could
impede its correct functioning.
Control the presence of all protective covers.
Document
Manuale vasca e pompa
Flie name
Manuale vasca e pompa

4.5 Lubrication

5. USE

Year
2016
Page
Revision 17 of 25
0