Installationsteps - WeatherTech Easy-On Instrucciones De Instalación

Installationsteps

NOTE: Actual application may vary slightly from illustrations.
Note the location of the (4) square holes.
Press (4) hood inserts into the (4) square holes. If
necessary use tape to hold them firmly in place.
Align pre-drilled holes in hood shield with holes in hood. Place
Using a phillips screwdriver install (4) screws with (4)
washers at the locations noted in Step 3 .
hood shield on hood, ensuring protective fim is between the hood
shield flange and hood edge.
Insert (1) fastener and push firmly through hole ir
Note the location of the (2) remaining holes.
hood shield and into hood to secure. Repeat for
remaining hole location.
Close hood, and install bump ons at pre-cleaned loca ­
tions on the painted hood surface.
Page 2 of 3