Maintenance, Cleaning And Storage - BMW Active Hybrid E-Bike Manual De Instrucciones

Tabla de contenido

Publicidad

EN

8.7 Maintenance, cleaning and storage.

Maintenance and cleaning
Keep the battery pack clean. Clean it carefully with a dry and soft
cloth. The battery pack may not be dipped into water or cleaned with
a water jet. If the battery pack no longer functions, please contact an
authorised dealer. Only place the battery pack on a clean surface.
In particular, avoid soiling on the charging connections and the
contacts.
Service Life
The service life of the battery pack can be extended if it is
maintained and, in particular, stored in the right conditions (ambient
temperature between 10ºC and 30ºC)
As the battery pack is used, its capacity will progressively decrease,
even if it is well maintained. This is a normal process. The battery will
approximately lose 20% of its maximum capacity after 500 complete
charging cycles.
Storage
After about three months without use, check the charging status
of the battery pack and charge it up to about 50% if the charge is
under this level.
66
9 BASIC CONFIGURATION.
9.1 Fitting the pedals.
Right pedal: The right pedal is
marked on the axle with the
letter R. Tighten in clockwise
direction.
Left Pedal: The left pedal is
marked on the axle with the
letter L. Tighten in anticlockwise
direction. Grease the thread of
the pedals.

Publicidad

Tabla de contenido
loading

Productos relacionados para BMW Active Hybrid E-Bike

Tabla de contenido