Transport; Electrical Connection; Start-Up - Master MCO Manual De Uso Y Mantenimiento

Transport

Box 136 x 53 x35 cm = 28 kg // Net weight =26 kg

Electrical connection

The electrical connection of the output conveyor belt must be carried out using a single-phase 230 V and 50-60 Hz
power supply.
Placement
The output conveyor belt must be placed on a flat surface, without irregularities on the ground, ensuring its stability.
It is only suitable for indoor use and under no circumstances should the electrical part be exposed to water.
Operation
The output conveyor belt makes it possible to carry out exhaustive quality control. The complete production system
includes the input conveyor belt and rails.
The rails make it possible to give the desired inclination to the production system.
+
+
The input conveyor belt enables a constant feed to be obtained to increase production by 30

Start-Up

For the assembly process of the output conveyor belt, it is necessary to place several hammerhead nuts in the
aluminium profile slots. How to do this is shown below.
Firstly, insert the hammerhead nut into the slot of the
1
aluminium profile as shown in the following image.
Finally, turn the hammerhead
2
www.masterproducts.es
19