Checks to be carried out before connecting
+
Ensure that the conveyor belt is properly adjusted to avoid displacement during use.
+
Align the production line to the desired slope using the levelling bases.
Maintenance
General aspects
Before assembling, using, or servicing the Master Products belt conveyor, it is essential to read, understand, and
follow the instructions in this manual. Failure to follow the instructions and safety precautions could cause serious
injury to persons and damage to the equipment.
If there is any question about issues or problems not covered by this manual, do not hesitate to contact Master
Products Inoxidable, S.L. to request technical assistance.
Routine or preventive maintenance is a necessary safety practice. It only requires a few basic steps and will help
ensure a long, reliable and useful life of the purchased machine.
Some components, especially the conveyor band and rollers, are susceptible to retaining and accumulating resinous
particles due to the nature of the raw material being processed. Over time, this can lead to excessive friction and can
ultimately interfere with the overall performance of the machine.
Keeping the equipment clean, disinfected and sterilized is very important for preventing contamination of the raw
material being processed. The basic maintenance tasks to be performed on the conveyor belts are exclusively
cleaning. A general recommended cleaning procedure to follow is detailed below.
22
www.masterproducts.es