Publicidad
REWIND (MCS)
Status
Data Bytes
F0H
7FH, Dev, 06H, 05H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
05H
REWIND (MCS)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
goes into the rewind condition.
RECORD STROBE
Status
Data Bytes
F0H
7FH, Dev, 06H, 06H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
06H
RECORD STROBE
F7H
EOX (End of System Exclusive Message)
If the transport switch [REC] was pressed out of the recording condition, the CDX-1
transmits as the device ID 7FH.
RECORD EXIT
Status
Data Bytes
F0H
7FH, Dev, 06H, 07H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
07H
RECORD EXIT
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
exits from the record condition.
MMC RESET
Status
Data Bytes
F0H
7FH, Dev, 06H, 0DH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
0DH
MMC RESET
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
resets all communication channels related with MMC.
WRITE
Status
Data Bytes
F0H
7FH, Dev, 06H, 40H, ccH, ddH, eeH, ..., ffH, ...
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
40H
WRITE
ccH
Information Bytes follows the command
ddH
The name of the writable Information Field
eeH
Information Field Format
|
|
ffH
Field names and data
|
|
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
writes the data to the specified information field.
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
MASKED WRITE
Status
Data Bytes
F0H
7FH, Dev, 06H, 41H, 04H, ddH, eeH, ffH, ggH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
41H
MASKED WRITE
04H
Number of Bytes follows the command
ddH
The name of the masked type writable Information Field
eeH
Byte number to write in the Bit Map
ffH
Bit location of the bit map byte to change
ggH
New data to write to the specified bit map byte
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
writes the data to the specified bit map byte.
LOCATE (MCP)
Format 1-LOCATE [I/F]
Status
Data Bytes
F0H
7FH, Dev, 06H, 44H, 02H, 00H, nnH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
44H
LOCATE (MCP)
02H
Number of Bytes
00H
"I/F" sub command
nnH
Information Field (08H, 09H, 0AH, 0BH, 0CH, 0DH, 0EH, 0FH)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
locates the selected time location stored to the specified information field.
Format 2-LOCATE [TARGET]
Status
Data Bytes
F0H
7FH, Dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH F7H
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
44H
LOCATE (MCP)
06H
Number of Bytes
01H
"TARGET" sub command
hrH, mnH, scH, frH, ffH
Standard Time with Sub Frame
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
locates the specified time location received from the command.
MOVE
Status
Data Bytes
F0H
7FH, Dev, 06H, 4CH, 02H, ddH, ssH
Byte
Description
F0H
Status of System Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
Dev
Device ID (10H or 7FH)
06H
MMC Command Message
4CH
MOVE
02H
Number of Bytes
ddH
Name of the Efficient Destination Information Field
(08H,09H,0AH,0BH,0CH,0DH,0EH,0FH)
ssH
Name of the Efficient Source Information Field (01H)
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
transfers the data on the selected source information field to the destination Information
Field, if the name of both information fields is efficient.
MIDI Implementado
Status
F7H
Status
F7H
Status
Status
F7H
205
Publicidad
Capítulos
