Check fuel system for any cracks or leaks including, but not limited to, fuel line hoses, fuel valve, vent line hoses, vent valve, vapor valve, carbon
7.
canister, and grommets. Replace as needed.
More often under dusty or dirty conditions and during hot weather.
8.
Inspect ROPS after the first 20 hours of operation and then after every 500 hours of operation or yearly whichever comes first.
9.
10. Refer to engine owner's manual for engine service information.
11. If caster fork tapered bearing seals leak, refer to the General Service Manual (P/N 123940) for repair procedures.
12. Refer to the General Service Manual (P/N 123940) to service or repair the tapered wheel bearings.
13. Any maintenance operation that requires the removal of safety covers must be performed by a trained service technician.
* After completing maintenance cycle (500 hours), repeat cycle.
606839CE
4-11
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
REV C