Setting Up For FI Rst-Time Use; Lcd Screen Overview; Dashboard; Entering Security Pin - Ryobi ROBOYAGI 800 Traducción De Las Instrucciones Originales

SETTING UP FOR FIRST-TIME USE
NOTE: Make sure the master switch is turned on and
the mower is properly docked.
1. Press and hold the confi rm button until the RYOBI
logo appears.
2. Using the selector knob, choose a preferred
language. Press the confi rm button.
3. Read through the information and press the confi rm
button.
4. Choose the fi rst digit of your security PIN. Press
the confi rm button. Repeat the step to choose the
succeeding digits of your security PIN.
5. Re-enter your security PIN.
If the security PIN setup is successful, a confi rmation
screen appears. If PIN code mismatch appears,
repeat step 4.
6. Press the confi rm button.
7. To set up Wi-Fi, select one of the following:
●
[YES]: Set up the Wi-Fi connection. For
instructions, refer to the "Wi-Fi Setup" section.
●
[NO]: Set up the Wi-Fi connection at a later time.
If there is no Wi-Fi signal or if [NO] is chosen,
manually set the date and time.
8. On the [Date/Time Setup] screen, choose the date.
a. With [dd] highlighted, choose the day. Press the
confi rm button.
b. With [mm] highlighted, choose the month. Press
the confi rm button.
c. With [yy] highlighted, choose the year. Press the
confi rm button.
9. Choose the time.
a. With [--:] highlighted, choose the hour. Press the
confi rm button.
b. With [:--] highlighted, choose the minute. Press
the confi rm button.
10. Press the confi rm button.
11. On the [Setup] screen, press the confi rm button.
12. Choose a preferred cut height. Press the confi rm
button.
13. Press the confi rm button.
14. To set up the docking direction, select one of the
following:
●
[CW]: The mower will go back to the charging
station in a clockwise direction.
●
[CCW]: The mower will go back to the charging
station in a counterclockwise direction.
15. Press the confi rm button.
16. To set up the mowing schedule, select one of the
following:
●
[YES]: Set up the mowing schedule. For
14
instructions, refer to the "Setting a schedule"
section.
●
[NO]: Set up the mowing schedule at a later
time.
If [NO] is chosen on the [Schedule Setup] screen,
perform a perimeter test run.
17. On the [Perimeter Test Run] screen, read through
the information and select one of the following:
●
[Start test]: Start the perimeter test run.
●
[Do it later]: Perform the perimeter test run at
a later time.
18. Read the warning text, then press the confi rm
button to continue.
19. Read and follow the instructions on the display
screen. Press the confi rm button to continue.
20. A [Perimeter Test Run] screen appears. Close the
control panel cover to start testing.
NOTE: To stop the perimeter testing, press the stop
button. Follow the instructions on the control panel
screen of the product to either continue test run or
cancel test run.

LCD SCREEN OVERVIEW

DASHBOARD

5
4
3
The dashboard provides information of the product
status and current settings.
1. Specifi es the cutting operation of the product.
2. Displays the cut height.
3. Indicates the Wi-Fi connection strength.
4. Displays the current battery charge.
5. Displays the date and time.

ENTERING SECURITY PIN

1. Enter your security PIN.
2. With [Confi rm] highlighted, press the confi rm button.

MENU

1
2