Product Features; Bump Sensors; Lift Sensors; Area Sensors - Ryobi ROBOYAGI 800 Traducción De Las Instrucciones Originales

WARNING
Never touch exposed terminals at all times.

PRODUCT FEATURES

The mower is equipped with several sensors that
protect both the mower and the user. Bump sensors,
lift sensors, area sensors, a tilt sensor, and a charging
station sensor are built-in safety features of the mower.
The mower also has a built-in alarm that alerts the user
when the mower is in a fault state and requires the
security PIN to be entered.
The automatic height adjustment feature of the mower
allows the user to automatically set the cut height from
20 mm to 60 mm.

BUMP SENSORS

The bump sensors detect when the mower bumps
into an obstacle. When the sensors are activated, the
mower stops, backs off, and then turns to continue in a
different direction.

LIFT SENSORS

The lift sensors detect when the mower is lifted from
the ground during the operation. When the sensors are
activated, the blade stops immediately and the wheels
vibrate for 3 seconds.

AREA SENSORS

The area sensors keep the mower within the defi ned
boundary by sensing the proximity of the mower to the
wire.

TILT SENSOR

The tilt sensor detects when the mower is tilted in
relation to the horizontal plane. When the mower is
°,
tilted to 25 the sensor is activated and stops the
wheel and blade.

CHARGING DETECTION SENSOR

The charging detection sensor is activated when the
mower is docked at the charging station.

ALARM

The built-in alarm is triggered when the mower is in a
fault state and requires the security PIN to be entered.
The alarm is also set off when the security PIN is not
entered within the required time after the stop button is
pressed or if the mower is lifted off the ground.

AUTOMATIC HEIGHT ADJUSTMENT

The automatic height adjustment sets the distance
between the blade disc and the levelled ground
surface. The cut height setting is from H1 (20 mm) to
H9 (60 mm) in 5 mm increments. This feature can be
controlled via the control panel or the ROBOYAGI app.

ROBOYAGI APP

See page 426
The mower is equipped with Wi-Fi connectivity that
enables it to be monitored and controlled via
the ROBOYAGI app, installed on an iPhone or
Android phone.
The ROBOYAGI app is a free software application
that can be downloaded from the App Store (IOS)
and Google Play (Android). Please check the release
notes for device compatibility. The ROBOYAGI app
is easy to download, setup, confi gure, and operate.
A user-friendly interface provides convenient remote
monitoring and controlling capabilities for the mower.

SYMBOLS ON THE PRODUCT

Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Operate the disabling device before
working on or lifting the product.
Beware of sharp blades. Blades
continue to rotate after the motor is
turned off.
Beware of thrown or fl ying objects.
Keep all bystanders, especially
children and pets, at least 15 m away
from the area of operation.
Stop the product before performing
any maintenance tasks. The product
should not be ridden on.
SMPS (Switch mode power supply
unit)
SMPS incorporating a short-circuit-
proof safety isolating transformer
Class II tool
Time-lag fuse 3.15 A
Class III electrical protection
Conforms to all regulatory standards
in the country in the EU where the
product is purchased.
EN
SV
DA
NO
FI
DE
FR
ES
IT
PT
NL
RU
PL
HU
CS
RO
SK
HR
ET
LT
LV
SL
BG
TR
UK
9