Spanset NoCut sleeve Borrador De Las Instrucciones página 17

5 Storage and cleaning
Store NoCut in a cool, dry and well-ventilated place, away from
®
chemical influences. NoCut
directly to accelerate drying; instead dry in a warm, well-ventilated
room. Remove foreign bodies stuck to the fabric of NoCut
cuttings, sand etc., or rinse with water if necessary.
6 Useful information and training
NoCut is mainly used for the protection of round slings in line with DIN
®
EN 1492-2 and lifting straps in line with DIN EN 1492-1 from sharp-edged
loads. The manufacturing process for the NoCut
is certified in line with DIN EN ISO 9001. When using textile lifting
pad
equipment, consult the local occupational health and safety regulations
as well as the regulations of the professional associations in Germany.
Further information and sources for the regulations can be requested from
your SpanSet retailer or directly from SpanSet. NoCut
high-performance fibres. You can find further information about the fibres
HMPE and UHMWPE at http://en.wikipedia.org/wiki/Polyethylene.
Glossary:
Language code: English
EN
Please read the Operation Manual and follow the warnings and
safety information.
Note: Special care and attention required!
Forbidden!
Information: Notes on handling:
Utilise SpanSet training sessions and tuition to train
your staff. We offer regular seminars in the fields of
lifting, loading and fall protection technology at our
safety training centre. We also offer training on your
should only be air-dried. Do not heat
®
, e.g. metal
®
and NoCut
®
sleeve
is woven from
®
Page
®
EN
15