Silver Cross Pioneer Manual De Instrucciones página 7

12
10.1
10.2
Attaching the bumper bar to
the carrycot or seat unit
Attach the bumper bar
10.1
by pressing the ends of
the bumper bar into the
attachment points of the
carrycot/seat unit frame.
Wait to hear them 'click' into
place. Lift gently to ensure the
bumper bar is locked in place.
To detach, press the bumper
10.2
bar release button on the
carrycot/seat unit frame with
one hand and pull the bumper
bar away from the connector
point with the other hand.
The bumper bar will rotate.
To detach both sides repeat
point ( ) above. With
10.2
one side of the bumper bar
removed the carrycot/seat
unit is easily accessible.
WARNING: THE BUMPER BAR
MUST BE SECURELY CONNECTED
AT ALL TIMES WHEN IN USE. THE
SAFETY OF YOUR CHILD IS YOUR
RESPONSIBILITY.
WARNING: ALWAYS REMOVE
YOUR CHILD FROM THE SEAT
UNIT BEFORE ATTEMPTING
TO LIFT AND REMOVE THE
SEAT UNIT.
WARNING: THE BUMPER BAR IS
NOT A CARRY HANDLE.
11.1
11.2
Attaching the carrycot to your
chassis
To attach your Pioneer
11.1
carrycot to the Pioneer chassis
hold the carrycot above the
chassis. Locate the carrycot
chassis connector posts into
the attachment slots on
the chassis. Ensure that the
carrycot 'clicks' into place.
The carrycot should be fitted
rearward facing. Lift the
carrycot gently by the bumper
bar to check the carrycot has
locked into place.
WARNING: NEVER USE THIS
CARRYCOT ON A STAND.
Detaching the carrycot from
your chassis
With the Pioneer carrycot
11.2
facing you, pull both carrycot
release handles outwards and
lift the carrycot clear of the
chassis.
Always ensure your bumper bar
is attached when your child is in
the carrycot.
This product is suitable for a
child who cannot sit up by itself,
roll over and cannot push its self
up on its hands and knees. Max
weight of child: 9kg.
CAUTION: Only use replacement
parts supplied and approved by
the manufacturer.
silvercrossbaby.com
13