A- Things That Must Be Done Before Using Your Cooler And - Ugur USS 60 DTKL Guia Del Usuario

A- THINGS THAT MUST BE DONE BEFORE USING YOUR COOLER
WARNING!
• Do not place your product to a place exposed to direct sunlight or influence area of the heat sources such
stove, radiator core, oven, cooker, radiant and infrared. Otherwise, this may cause performance decrease,
damage of your product or make it become dysfunctional. (Picture 1)
• Your product is set for operating at mains power of 220-240 Volt 50 Hz. Using your cooler with a different
voltage may cause it become dysfunctional and fire. (Picture 2)
• Electrical installation must conform to national regulations. (Picture 3)
• There must absolutely be a residual current relay and a fuse in your electrical installation for preventing the
risks of electrical shock and fire.
• Our company is not responsible for the failures and damage that may occur in case of using without gro-
unding.
• Place the product in a damp-free place with unobstructed air circulation.
• You must clean inside your product before the first use (see page 23)
• After placing your product to its place, wait for one (1) hour without moving it before start using.
• If your cooler is installed under very cold weather conditions, then the waiting period must be at least two
(2) hours before start it to operate.
• If you do not use your product for a short time or leave it empty, do not unplug it for saving energy. Other-
wise, more energy will be consumed for re-cooling your product.
• Unplug your product in case of sudden blackouts. For starting again, plug in your product 20 minutes after
the electricity is supplied. High voltage occurring at the moment of electricity supply may cause damage
of your product and fire.
• Do not allow wild animals and pets to enter into your product or walk around. It may damage your product
or cause death and injury of the animals. Furthermore, wild animals and pets may cause fire by giving harm
to the electrical installation.
EN
• Never place hot foodstuff into your cooler for cooling purposes.
• The product you've purchased is designed and manufactured for cooling and storing bottles and/or canned
beverages or packed food only. Please do not use for other purposes.
• Your product is designed for using at indoor places. Do not use your product at outdoor places.
• Do not place materials that must not be cooled down into your product. Do not use your product for def-
rosting frozen food.
• Product installation, placement, maintenance and cleaning must be done as stated in the manual. Do not
apply anything contrary to the manual. In case of any damage that may happen in your product as the result
of such use, warranty conditions will be invalid due to user error.
• Frost deposit will increase in the products, the doors of which are left open or opened-closed frequently
and your product will not be able to perform cooling operation. Therefore, open your product's door only
when you need. Make sure that the product's door is closed when you don't need.
Picture 1 Picture 2
38
Picture 3