Hanging - Ugur USS 60 DTKL Guia Del Usuario

C -INSTALLATION OF YOUR COOLER.

Hanging

DİKKAT!
• There is wall hanging apparatus only behind USS 60 / USS 95 and USS 100 models. You do not need to
leave an additional gap for these models.
Model
USS 95 DTKL
USS 60 DTKL
EN
A DIMENSION MAX. LOADING CAPACITY
360 30 Kg.
345 20 Kg.
2 holes with the diameter of 7 mm and depth of 40 mm are drilled on a surface, the
solidness of which is ensured, on the A axis which you have determined according to the
device.
Expansion bolt of 8 mm is driven into both holes tightly.
2 screws of 4,8x38 YSB DIN NO:7981 are inserted into the expansion bolt that are driven
tightly.
It is necessary to leave the distance of 2-3 mm between the head of the screw and the
expansion bolt and for inserting the hanging plates behind the cooler to the screws.
Note: Leaving the screws excessively long may cause detachment of the cooler.
Make sure that the slot hole on the hanging plate behind the cooler fits securely.
While hanging the device onto the expansion bolt, you can align the screw and slot hole
from the hole on the side surface of the hanging plate.
46