Electric Connection Rules - Ugur USS 60 DTKL Guia Del Usuario

C -INSTALLATION OF YOUR COOLER.

Electric Connection Rules

The product will start when you insert the plug into the outlet as shown in picture 10.
WARNING!
• It is forbidden to insert the plug into multiple socket and to use extension cord. (Picture 11)
• There is no separate on-off switch on your product.
• Do not contact the cables of your product, which are connected to the mains, to hot surfaces.
The outlet you will use must be grounded. Furthermore, the outlet to be used must have the resistance of at least
10-16 A and be protected with a suitable fuse. Definitely take assistance from our technical service or a competent
electrician with regards to the fuse that should be present on the mains where the outlet is connected.
Mains voltage and frequency must be same with the value written on the label inside your product. If your mains
voltage is extremely below or above the value indicated, definitely supply demanded voltage by using a voltage
regulator. You can get assistance from an expert electrician with this regard.
Do not place your product's cord onto passageways. This may cause you to get injured and damage your cooler.
(Picture 12)
EN
Picture 10 Picture 11
48
Picture 12