Setting Internal Temperature Of Your Product - Ugur USS 60 DTKL Guia Del Usuario

D -USING YOUR COOLER

Setting internal temperature of your product

Temperature settings of your product have been set in our factory in a manner that operates under the most suitable
conditions.
Protection temperature of the food are observed from the thermometer (optional) equipped in your cooler and set
via the thermostat. (Picture 16) However storing the factory settings is the most appropriate one.
Internal temperature of your cooler can be adjusted by rotating the thermostat button (Picture 17). When the
thermostat is at position "7", internal temperature of the refrigerator will be at the lowest level. Internal temperature
of your product can be set between +1 and +10°C.
WARNING!
Thermostat operation is different only in USS 374 DTKGD Vine Cooler. In these products, you will get the
coolest temperature when the thermostat is set as position 1 and highest temperature when it is set as
position 7.
If your wine cooler is equipped with a fan;
The temperature inside the cooler in position 1 is about 10°C.
The temperature inside the cooler in position 7 is about 18°C.
If your wine cooler is not equipped with a fan and static;
The temperature inside the cooler in position 1 is 4-5°C
EN
at the bottom, 10°C in the medium and 15°C in the top section.
The temperature inside the cooler in position 7 is 15°C
at the bottom, 18°C in the medium and 22°C in the top section.
Picture 16
Picture 17
50