User Profiles (Pairing Porsche Id); Connect Energy Manager; Hotspot; Adapt Charging Current - Porsche 9Y0.012.003-ROW Manual De Instrucciones

Connection via WiFi
1. Select the W option.
F
I I
2. Select the home network from the list of detected
WiFi networks.
3. Enter and confirm the password.
Connection via PLC pairing button
1. Select the PLC option.
PAIRING BUTTON
2. Start the connection setup process on the PLC
adapter. Confirm by pressing OK on the charger.
Once the setup is connected, confirm with
.
C
ONNECT
The connection to the PLC network is
established.
If a connection to the PLC network is established,
the symbol will be displayed in the status bar.
Connection via PLC security code
A device on which the control software for the PLC
network is installed must be used for this method.
1. To establish a connection to a PLC network using
the security code, select PLC
SECURITY CODE
The security code appears on the display.
2. Enter the security code in the relevant menu of
the control software for the PLC network in order
to integrate the charger into the PLC network.
The connection to the PLC network is
established.
If a connection to the PLC network is established, the
symbol will be displayed in the status bar.

User profiles (pairing Porsche ID)

When the charger is paired to your Porsche ID,
information about the charger and the charging
processes can be displayed in My Porsche and in the
Porsche Connect app.
To pair the charger with your Porsche ID:
e Call up the web site specified on the display on
the charger in the browser on your device and
enter the user code.
– or –
e Scan the QR code displayed on the charger. You
can scan the QR code in the following ways:
– Using the Porsche Connect app (My Account
> Charging cables & devices > Scan QR code).
– Using the camera on your device (iOS 11 or
higher, different for Android).
– Using an app for scanning QR codes.
When the charger has been paired successfully,
the installation assistant moves on to the next
step.

Connect energy manager

If an energy manager is available, it is possible to
establish a connection to it. The energy manager then
assumes control of the charging process.
e For instructions for connecting, refer to the
operating instructions for the energy manager.
If there is no energy manager available, the vehicle
.
will be charged at the charging current entered on
the charger (S > A
ETTINGS
f Refer to chapter "Adapt the charging current" on
page 11.

Hotspot

If it is not possible to integrate into a home network,
the charger can activate a hotspot, thereby
establishing a connection to the web application on
the charger.
e To activate a hotspot, click on A
Once a hotspot has been activated, the symbol
will appear in the status bar.

Adapt charging current

The maximum permitted charging current for the
charger can be set here if there is no energy manager
available in the home network.
The displayed maximum value is determined by the
types of cable that are connected.
e Set the charging current to the maximum value
available in the power grid used for the charger.
Use P
f Refer to chapter "Charging Current Limiting" on
page 13.

Device protection

To prevent an unauthorized vehicle from being
connected to the charger, a PIN prompt can be
configured.
1. To activate the PIN prompt, select O
2. Enter a 4-digit PIN and confirm.
3. Enter the PIN again and confirm it.
Activation of the PIN prompt is confirmed.

Finishing the setup process

e Check the settings you entered using S
).
DAPT CHARGING CURRENT
and complete the installation.

Web Application

Further configuration options and detailed
information about the previous charging processes
can be displayed using a web application, which is
specific to each charger.
.
CTIVATE HOTSPOT
Web Application
and M to do this.
LUS INUS
.
N
UMMARY
US
FC
ESM
PTB
TR
RU
UK
VIE
HE
AR
JPN
KOR
CHS
CHT
THA
11