Service, Maintenance And Care; Service Intervals - diversey swingo 1650 Manual De Instrucciones

Storing / parking the machine (not in opera-
tion)
Notice:
Store the machine with a lifted suction nozzle, lifted
brush and open tank lid.
Thus, the tank can dry, and the generation of mold and
unpleasant odors is prevented.
Caution:
Never store the machine with uncharged batteries.
Otherwise, the batteries will be damaged beyond repair.

Service, maintenance and care

The maintenance of the machine is a prerequisite for impeccable op-
eration and a long service life.
Caution:
Use original TASKI parts only; otherwise any war-
ranty and liability claims will be invalidated.
Notice:
In order to rule out unintended machine functions,
the following must always be carried out before
starting maintenance works
- the machine must be switched off,
- the key can be removed.
Legend:
◊ = after every cleaning, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service light
Activity
Charge batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tanks
Clean all parts marked in yellow
Clean the brushes
Clean the suction nozzle, check the
blades for wear and change them if
necessary
Wipe the machine using a damp cloth
Clean the gasket of the tank cover,
check for cracks and replace it if neces-
sary
Maintenance and service program car-
ried out by Diversey service techni-
cians

Service intervals

TASKI machines are high-quality machines that have been inspected
for safety at the factory by authorized inspectors. Electrical and me-
chanical parts are subject to wear and aging after a longer period of
use.
In case of extraordinary use and/or insufficient
maintenance, shorter intervals may be required.
Service center
Please always indicate the type and number of the machine whenev-
er you contact us to place an order or in case of malfunctions.
You can find this information on the nameplate of your machine. The
address of your closest TASKI service partner is provided on the last
page of these instructions of use.
Blade change swingo 1650
● 5
• Undo the four socket screws (1, 2, 3, 4).
• Separate the squeegee body from the squeegee core (5,
6).
● 6
• Remove the blades (7, 8).
• Clean the squeegee body and both squeegee cores under
running water.
● 10
• Mount the "turned" or new blades onto the squeegee core.
• Reinsert the squeegee core into the squeegee body.
●
• Retighten the four socket screws.
● 10
● 10
● 10
●
●
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 550 working hours) or
at least once a year.
Notice:
1
2
5
7
8
3
4
6
11