Checking The Oil Level; First Use After Long Periods Of Storage; Minimize Wear And Avoid Damage - Stihl RE 271 Manual De Instrucciones

English

Checking the oil level

max.
min.
Check oil level weekly and after
transport.
Place the machine on a flat
N
horizontal surface
Check that the oil level is between
N
the "min" and "max" marks. If it is
not: visit your servicing dealer.
STIHL recommends STIHL
servicing dealers
50
First use after long periods of
storage
During long periods of storage, mineral
residue from the water may be
deposited in the pump. This may cause
the motor to start with difficulty or not at
all.
Connect the machine to the water
N
supply and flush thoroughly with tap
water, leave the power cord
unplugged while doing so
Plug the power plug into the wall
N
socket
Switch on the machine with the
N
spray gun open
Minimize Wear and Avoid
Damage
Compliance with the specifications of
this owner's manual will avoid excessive
wear and damage to the machine.
The machine must be used, maintained
and stored as carefully as described in
this owner's manual.
The user is responsible for all damage
caused by failure to comply with the
safety, operating and maintenance
instructions. This applies in particular
for:
Product modifications not
–
authorized by STIHL
Use of accessories that are not
–
approved for the machine,
unsuitable or of inferior quality
Use of the machine in a manner not
–
in keeping with the intended use
Use of the machine in sporting
–
events or competitions
Consequential damages due to
–
continued use of a machine with
defective components
Damage due to freezing
–
Damage due to improper power
–
supply voltage
Damage due to poor water supply
–
(e.g., cross-section of the intake
hose too small)
Maintenance work
All of the tasks listed under
"Maintenance and Repairs" must be
carried out periodically. If the user does
RE 271, RE 271 PLUS, RE 281, RE 281 PLUS