Operation; Operating The Overhang Counter Swim Unit; Turning The Unit On And Off; Air Regulation Function - Speck pumpen BADU Jet perla Manual De Instrucciones

7

Operation

7.1

Operating the overhang counter swim unit

7.1.1

Turning the unit ON and OFF


7.1.2

Air Regulation Function


7.1.3

Light operation


7.1.4

Setting the ball nozzle



7.1.5

Cover damage.


7.1.6

Optimal water level

If there is insufficient water in the pool, the unit will not function
properly.

05/2013 VG 766.2330.061
Switching the unit ON and OFF is done by pressing the pneumatic
push button built into the housing. See page 65, figure 10.
The air regulator enables the intake of air via the nozzle in order to
achieve a bubbling bath effect. See page 65, figure 10.
Turning the light ON and OFF is done by pressing the pneumatic
button built into the housing. See page 65, figure 10.
The direction of the ball nozzle is adjustable. The nozzle is normally
set in a horizontal or slightly upwards position which then provides
the optimal effect for counter swimming.
Ensure the ball nozzle is fully opened by turning it anti-clockwise
before start- up.
. The cover is not designed to withstand excessive weight and
should not be stood on or used as a diving board or starting block.
Check that the level of water in the swimming pool is sufficient. See
page 66 figure 13 and observe the markings on the unit.
7 Operation
EN 53