Publicidad
Idiomas disponibles
Idiomas disponibles
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
16"
(40.6 cm)
Pump/Control Access
24" (61 cm) W x
15" (38.1 cm) H Min
Product Information
Applicable product:
Drop-in bath whirlpool - custom pump option
Fixture*:
Basin area:
Bathing well
42" (106.7 cm) x 20" (50.8 cm)
Top area
51" (129.5 cm) x 24" (61 cm)
Weight
110 lbs (49.8 kg)
To overflow:
Water depth
14" (35.6 cm)
Capacity
60 gal (227 L)
* Approximate measurements for comparison only.
Included component:
Cut-out template
Pump
Heater
1.5 kW
Required accessories
Jet trim kit
1033683-1-D
11"
(27.9 cm)
2-1/4"
(5.7 cm)
9" (22.9 cm)
60" (152.4 cm)
2-3/4"
(7 cm)
1-1/2" OD
K-1014-HA
1022451-7
V
Hz
A
240
50/60
11
2-1/2"
1" (2.5 cm)
(6.4 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor/control
Installation Notes
Install this product according to the installation guide.
NOTE: The pump protrudes 1-1/2" (3.8 cm) beyond the rim.
The pump must be relocated to its custom position at the time of
installation. Provide adequate clearance.
Floor support under whirlpool must provide for a minimum of 48
lbs/square foot (234 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
K-9698
2
32" (81.3 cm)
20"
(50.8 cm)
220-240 V, 15 A, 50/60 Hz
2"
(5.1 cm)
Kohler Co.
Publicidad
