Programming And Operation; Starting The Oven - Lotus cooker E104-UPE Instrucciones Para La Instalación, Uso Y Mantenimiento

EN

4.1 PROGRAMMING AND OPERATION

A ON/OFF button
B Temperature display
C Time display
D
Cooking chamber temperature selection
F Time selection
G Cooking programs phases
H
Manual humidification/ humidification percentage button
M Increase value button
N Reduce value button
P
Automatic programs
S Start/stop button

4.2 STARTING THE OVEN

Switch on the water interception valves and the protection electric switch, installed upstream.
Press ON/OFF button to turn on the display.
ATTENTION!
Switching off the oven with ON/OFF button does not interrupt the power supply to the
electronic boards.
If the oven is not used, we advise you to switch off electric power supply using the protec-
tion switch upstream.
4.5 COOKING PARAMETERS SETTINGS
4.5A COOKING CHAMBER TEMPERATURE
Display B shows the temperature of the cooking cham-
ber. Pressing temperature button (D), the display starts
flashing and shows the values set.
Press the button shown on the side to increase the value
on the display.
Press the button on the side to reduce the value on the
display.
Press again temperature button (D) to store the new value for the cooking. The led stops flashing.
The temperature range of the cooking chamber is 30 - 300 °C.
DIGITAL PROGRAMMABLE
26