Lotus cooker E104-UPE Instrucciones Para La Instalación, Uso Y Mantenimiento página 28

EN
4.5E STARTING A MANUAL COOKING
Pressing button S (start/stop), the preheating phase
starts.
The lower display shows the word PrE.
The leds PREHEAT next to PHASE button and the led next to START/
STOP button turn on.
When set preheating temperature is reached, the buzzer starts ringing
to advise the end of the preheating. On the lower display the writing
"PrE" flashes together with the preheating led.
The oven will maintain the preheating temperature until the door is
opened to load the food. When the door is closed, the cooking starts
with phase 1.
If the door is opened during preheating (before reaching the set preheating temperature), preheating
is automatically interrupted, as it is presumed the food has been loaded into the oven.
During preheating it is not possible to use automatic humidification, whereas manual humidification
is available.
4.5F MANUAL HUMIDIFICATION
Manual humidification can be activated while cooking by
pressing button H.
The valve that injects steam in the cooking chamber is
activated only when button H is pressed.
It is possible to change the parameters during the cooking in order to
adapt it to the food.
4.6A AUTOMATIC COOKING PROGRAMS
You can store up to 99 programs, from P01 – to P99.
There are 3 phases for each program. 3 leds indicate the
working phase (or the phase that is being set).
For each phase can be set:
- temperature
- time
- humidification
The oven is supplied with preset but not configured programs.
To search a program, select the programs list (not during a cooking)
with button P (pressing it slightly).
DIGITAL PROGRAMMABLE
28