STORZ & BICKEL Mighty Modo De Empleo página 58

10. D I S A S S E M B L I N G , C L E A N I N G A N D A S S E M B L I N G
Pull the Cooling Unit
Cap from the Cooling Unit Base
Remove the large and small Base Seal
Rings. Lever out the large Seal Ring
from the recess in the notch using the
Filling Chamber Tool.
Removal of the large Base Seal Ring
Push the upper Screen downwards out
of the Filling Chamber Cap from above
by using the Filling Chamber Tool sup-
plied.
Pressing out the upper Screen
Reassemble in reverse order.
When assembling, make sure
that Seal Rings are properly
seated. The Mouthpiece Seal
Ring, especially, must sit completely in
the cap and be no longer visible.
The upper Screen must be inserted
carefully into the groove provided. Dis-
regarding this may allow plant parti-
cles to enter the Cooling Unit, so block-
ing this or be inhaled.
59