Publicidad
Photo1
Photo 2
Photo 3
• Elevator servo 2: 15-19 mm
• Rudder servo 3:
8-10 mm
Photo 4
Photos 5 and 6
Photos 7 and 8
Photo 9
• NOTE:
©
Seabee
Photo 10
Photo 11
• NOTE: Do not use PVC insulating or strong fabric tapes to hold
together, as these will destroy the surface finish when removed.
Photo 12
• Note: the RH tailplane half (14) will be fitted with spars and
horns initially. Thereafter, the centrepiece will be removed and
the tailplane cut into its two halves (14 and 15).
• Degrease and roughen tailplane carbon spars with sandpaper.
together along their long axis
• Likewise, bond the spar (11) ONLY into RH half (14).
Photo 13
Photo 14
Photo 15
Photo 16
Photo 17
Photo 18
Photos 19 and 20
Bond both joiners (12)
Photo 21
Photo 22
Photo 23
Photo 24
Photo 25
Photo 26
No.
3294
Publicidad
