Descargar Imprimir esta página

Bulteh 2000 EKOMILK Guia Del Usuario página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
When the proper type of milk is displayed, press OK to start the measure-
ment. The milk is automatically driven into the measuring camera. The mes-
sage WORKING appears on the display while the measurement is started.
Warning: Do not remove the measuring mug while the measurement is
going on. This might cause result deviations out of the spec limits.
Warning: In case of formation of air bubble in the measuring camera the
message EMPTY CAMERA will appear on the display. In this case make
the measurement again.
As soon as the measurement is completed the display shows the results
for following milk parameters:
FAT, SOLIDS NON FAT (SNF), MILK DENSITY - on the upper row
ADDED WATER TO MILK, FREEZING VALUE*, PROTEIN - on the bottom row
*FREEZING VALUE = FREEZING POINT [°C]
(-100)
*
The milk returns automatically into the mug.
Warning: In case of motor damage the message MOTOR ERROR will
appear on the display. Contact your dealer to make the repairs. Mean-
while you may use the Analyzer in MOTOR OFF mode. (see "MILK ANALY-
SIS WITHOUT SUCTION PUMP")
PRINTING DATA (IN CASE OF MICRO PRINTER CONNECTED TO
THE ANALYZER)
After the current measurement is completed the results could be printed by
pressing the arrow button
on the analyzer front panel. Results are printed
every time when this button is pressed.
MILK ANALYSIS WITHOUT MOTOR (SUCTION PUMP)AVAILABLE
FOR MILK ANALYZER TYPE EKOMILK, EKOMILK120, EKOMILK-M
Press the MODE button once. Press the search buttons
to select the
MOTOR CHOICE mode. Press OK when the MOTOR CHOICE mode is dis-
played. Set the desired motor mode - OFF with search buttons
. Press
OK to confirm it. The message MOTOR TURNED OFF appears on the display.
This way the "MOTOR OFF" mode will remain set, even if the power supply is
turned off.
Take out the plastic plug with the vinyl tube from the syringe. Insert the plunger
instead of the plastic plug with the vinyl tube.
The Analyzer is ready for use in mode without suction pump.
Measurement
Steps: Press MODE button once and by means of the search buttons
select the desired mode:
COW MILK - analysis of cow milk
SHEEP (BUFFALO, GOAT) MILK - analysis of sheep milk (buffalo, goat
milk etc. - see p. 3)
9

Publicidad

loading

Este manual también es adecuado para:

Ekomilk-120Ekomilk-mEkomilk-ultraEkomilk-ultra pro