Booster Temperature; Superbooster Temperature; Application - STORZ & BICKEL Crafry+ Modo De Empleo

6 C O M M I S S I O N I N G A N D O P E R AT I O N
A vibration acknowledges activa-
i
tion and the red continuous light of
the LED display indicates heating.
When the battery is fully charged,
it takes approx. 60-80 seconds to
heat up. A double vibration and
green continuous light indicate
that the basic temperature has
been reached.
6.5.3 Booster Temperature
X Activate the booster temperature
by double-clicking the orange ON/
OFF switch.
When the LED display flashes red,
i
it indicates that the unit is heating
up. A double vibration and green
flashing signal that the booster
temperature has been reached.
6.5.4 Superbooster Temperature
X Activate the super booster tem-
perature by clicking three times on
the orange ON/OFF switch.
The LED display indicates heating
i
by flashing rapidly red. A double
vibration and rapidly flashing green
light signal that the super-booster
temperature has been reached.

6.6 Application

Start the vaporization after heating
i
has finished.
X Unfold the Mouthpiece of the Cool-
ing Unit.
X Place the Mouthpiece between
your lips.
X For a few seconds, evenly breathe
in half as much as you actually
could.
X Hold your breath for a few seconds
and then exhale slowly.
X Focus consciously on the breath-
ing process.
The more intense the vapors, the
i
greater the impairment of the flavor.
CAUTION
Health problems due to inhalation
of vapor
Coughing
• Do not use if suffering from
respiratory tract/lung diseases
51