7)
Replacing the oven light
Make sure the oven and the bulb are cool.
1
Unplug the range or disconnect the power.
2
Turn the glass bulb cover in the back of the oven
3
counterclockwise to remove.
Turn the bulb counterclockwise to remove it from
4
its socket.
Insert a new 40 watt appliance bulb,and then
5
turn it clockwise to tighten.Replace the bulb cover
by turning clockwise.
Plug in the range or reconnect the power.
6
CAUTION
Before changing your oven light bulb,disconnect the
electrical power to the range at the main fuse or circuit
breaker panel.Make sure the oven and the bulb are cool.
8)
Replacing the burner parts
This diagram shows how to replace the burner parts. When
replacing the burners, make sure that the two locating pins
on the bottom of the brass flame spreader are properly
aligned with the locating pin holes on the top of the simmer
ring.
Incorrect alignment will produce a potentially dangerous
flame and poor burner performance such as sparking/
clicking.
23