Ega Master EGATronik 51264 Manual De Instrucciones página 13

Warning!
Before using the anemometer, ensure that housing (or any part thereof) is not damaged. Inspect
any breakages or shortages of material and check the insulation of the connections.
To avoid possible injury and to prevent damage to the meter or the equipment under test, keep
the following rules:
- Do not use your hands to touch the fan.
- Replace the battery as soon as the battery indicator
- If the meter gives altered values or works in a strange way, stop using it and send it to the
nearest service for analysis.
- Do not use the meter in explosive, flammable or humid environments. If it is wet, it will affect
the performance of the anemoscope.
- If you have to repair the meter, use only authorized parts.
- Do not use the anemoscope if the housing is opened or damaged.
- When replacing the battery, make sure this is entered correctly (taking into account the "+"
"-").
Below it is a number of conditions that can damage the meter. Please read them carefully and
take them into account to prevent damage to the computer:
- Consider the range of the meter to avoid false results and damages in the device.
- Do not attempt to recharge the battery.
1. Fan
2. Wind direction indicator
3. Handle
4. Secondary display
5. Primary display
6. Power button
7. Functional buttons
8. Main unit
RULES FOR SAFETY OPERATION
THE ANEMOSCOPE STRUCTURE (see figure 1)
Figure 1
appears.
13