Ega Master EGATronik 51264 Manual De Instrucciones página 17

Enter ., 0, 0, 1 Mean . 001 LCD display "0.001"
... ... ...
In one area, it will probably to have different input methods but finally it has one display: Data
Input Range: 0.000~9999.
• Unit of measure of temperature: before the wind speed measurement, press the button
"°F / ° C" ° C → ° F and viceversa.
• Temperature, maximum wind speed: before the measurement of wind speed, press the
"MAX / MIN" Normal → Max and vice versa.
• Maximum, Average Wind count: Before measurement of wind speed, press "MAX / MIN"
Normal → Max → AVE and viceversa.
• Data storage functions:
1. LCD Display "No Data" if no values are stored.
2. LCD display "Time" if the database is full and cannot store any data at that time.
3. Manual data storage: press the button 7 to display the automatic data storage, it also
displays "REC" and in 0.5 seconds it will disappear. Then press the button 7 data store in the
next position.
4. Automatic data storage: Press the button 7. The LCD shows "REC" and will resume
again if you press the button 7. (Press the button twice quickly 7). Then you will see visual
signal "REC" automatic data storage. Press the menu button - automatic data storage. In case
the data storage is full, out of said storage.
5. Cleaning of recorded data
- Method 1: hold the 8 button until the screen displays CLR when it is on.
- Method 2: Resume to factory setting (see function setting stuff)
Press and hold button 7 to view the data records of wind speed measurement and wind count
measurement. It automatically displays last data record. RECNO will display on LCD.
1) Press button 2 to increase the reading logs. Press and hold to automatically increase the
reading logs.
2) Press button 8 to reduce the reading records. Hold to automatically decrease the reading
logs.
3) Press the 4 button to increase records in 100 units (when the database is extensive). The
record maximum is 2044.
4) Hold the button 7 to exit the mode of reading data.
17