Ega Master EGATronik 51264 Manual De Instrucciones página 18

Note: Before use, the wind speed must be greater than 10 m/s for 1 to 2 minutes.
Follow the instructions below:
1. Press the "Power" button to turn on the device.
2. Press "VEC / FLOW" (Figure 4). Will be displayed on screen both "VEL" and "FLOW".
3. Press button 1 (UNIT) to select the unit of measurement.
4. Place the device as shown in Figure 4. (Taking as reference the arrow indicating the
device).
5. In an interval of two seconds it will get more accurate readings.
6. To obtain more accurate readings, the device should move at least 20 degrees for
greater accuracy.
7. When the speed of the wind and the temperature of the wind measurement are
performed in parallel, secondary display will show the value of the temperature of the wind.
8. Press "º C / º F" (button 6) to select the temperature unit, (temperature in degrees Celsius
or Fahrenheit).
9. On the main screen is displayed value of the wind speed.
Connect to the computer via USB cable.
USB cable connects device to the computer as shown in Figure 5.
18
MEASURING WIND SPEED (see Figure 4)
Figure 4
CONNECTING TO THE COMPUTER (see Figure 5)