Environmental Requirements - Ega Master EGATronik 51264 Manual De Instrucciones

A. Replace the battery
To avoid false readings, replace the batteries when viewing the indicator
1. Turned off and disconnect all inputs.
2. Turn the anemometer.
3. Remove the screw from the battery compartment and remove the battery.
4. Replace with a new 9V battery. Cover and close the compartment with the screw.
B. Cleaning
Clean periodically the compartment with a damp cloth. Do not use abrasive.
C. Service and Repair
This device has auto calibration. It is advised not to attempt to repair the device unless you
are qualified.
D. General service
1. Clean periodically the compartment with a damp cloth. Do not use abrasive.
2. Remove batteries when not using the device for a long period of time.
3. Do not store the device in places where humidity, high temperature, hazardous areas,
flammable or strong magnetic fields.
Operating Temperature Range
Relative Humidity
Storage Temperature
Pressure
Safety/ Compliances
Figure 5
MAINTENANCE

ENVIRONMENTAL REQUIREMENTS

0ºC ~50ºC ( 32ºF ~ 122ºF )
0 ~75%, no condensation
- 20ºC ~ 65ºC ( - 4ºF ~ 149ºF )
500mB ~ 2 Bar
Certification: CE
EN61326: 2006
EN55022: 1998+A1+A2
EN55024: 1998+A1+A2
.
19