Battery Replacement; Troubleshooting - Concept VP 4200 Manual Del Usuario

BATTERY REPLACEMENT

1. Unscrew the screw on the
bottom of the appliance.

TROUBLESHOOTING

Before taking a broken appliance to an authorized service centre, read these operating instructions and
check the following:
Problem
Operation time of the
vacuum cleaner shortens.
The control diode shines
for only 30 seconds.
The control diode flashes
at higher frequencies
(faster) during charging.
Control diode is flashing
at higher frequencies (faster).
Control diode is flashing
at higher frequencies (faster).
ACCESSORIES
1 Long slot nozzle
2 Upholstery nozzle
Nozzle with a brush
3
4 Short slot nozzle
VP 42 00
2. Remove the battery cover.
Cause
Battery capacity has decreased.
The battery is inefficient.
Charging failure.
Rotary brush is blocked.
The battery overheats
(overheat control).
Remove the battery.
3.
Solution
Contact the dealer and
replace the battery.
The battery needs to be charged.
Contact the dealer.
Clean the rotary brush.
Stop vacuuming and let the
vacuum cleaner cool down.
E N
1
2
3
4
4 9