Technical Data; General Description - Steinberg Systems SBS-PF-200 Manual De Instrucciones

U S E R M A N U A L

TECHNICAL DATA

Parameter description Parameter value
Product name Parcel scale
Model SBS-PF-200
Power supply parameters Input parameters
AC 230V~ 50Hz
Output parameters
6V/1A
Battery 4x1,5V AAA
Scale pan dimensions [mm] 275x275x25
Minimum load [kg] 0.5
Maximum load [kg] 200
Division [kg] 0.1
Units oz / lb / kg
Weight [kg] 2.2

1. GENERAL DESCRIPTION

The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
EN
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general warning
sign).
Electric shock warning.
CAUTION! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to the Parcel scale. Do not use in
very humid environments or in the direct vicinity of water
tanks. Prevent the device from getting wet. Risk of electric
shock! Do not cover the device venting holes.
2.1. ELECTRICAL SAFETY
a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching grounded elements such as pipes,
heaters, boilers and fridges. There is an increased
risk of electric shock if your body is grounded on wet
surfaces or in a humid environment. Water ingression
into the device increases the risk of damage to the
device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
e) If working with the device outside, make sure to use
an extension cord suitable for external use. Using an
extension cord suitable for external use reduces the
risk of electric shock.
f) If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
2.2. SAFETY IN THE WORKPLACE
a) Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
b) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
c) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
d) If a fire starts, use solely powder or carbon dioxide
(CO2) fire extinguishers suitable for use on live
devices to put it out (in case the device is connected
to the mains by means of the power supply).
e) Save the instructions for use for further reference.
If the device is transferred to a third party, the
instruction for its use shall be transferred as well.
2.3. PERSONAL SAFETY
a) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instructions on how to operate the device.
2.4. SAFE USE OF THE DEVICE
a) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b) When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
6
Rev. 10.06.2019
c) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
d) To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
e) Clean the device regularly to avoid a durable
encrustation of dirt.
f) Do not drop or throw objects on the device. The
objects to be weighed should be placed carefully on
the scale pan.
g) Exceeding the maximum load of the scale can result
in device damage.
3. USE GUIDELINES
Parcel scale is designed to measure weight of elements
placed on the scale pan and to count the elements based
on their total weight.
The user is liable for any damage resulting from non-
intended use of the device.
3.1. DEVICE DESCRIPTION
1
D
2
C
1
B
A
1. Control panel with display
2. Scale pan
A. ON/OFF button
B. UNIT – the button to change the unit of measurement
C. COUNT – the button to activate the function of
counting the weighed objects
D. TARE – the button to allow net weight measurements
3.2. PREPARING FOR USE
Appliance location
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is used. The distance between each side of the device and
the wall or other objects should be at least 10 cm. Keep the
device away from hot surfaces. Operate the device on flat,
stable, clean, fire-resistant and dry surfaces out of the reach
of children and people with mental disabilities. Install the
device making sure that constant access to the main plug
is ensured (in case of the device connected to the mains
using the power supply). The power cord connected to the
appliance must be properly grounded and correspond to
the technical details.
The scale can be used only in the environment where there
are no draughts, corrosion, vibrations, high temperature or
high humidity.
• The control panel with the display can be hung
vertically or placed on a horizontal surface, as needed.
• The scale pan shall be put on a horizontal, even, stable
and clean surface that can withstand the weight of the
device and the objects to be weighed.
Rev. 10.06.2019
Battery installation
Unscrew the screw in the small flap on the side of the device
control panel. Insert 4 new 1.5 V batteries.
3.3. DEVICE USE
NOTE: Exceeding the maximum load of the scale can result
in device damage.
Weighing
a) Connect the device to the power supply or use the
batteries.
b) Press the ON/OFF [A] button.
c) Wait until "0.0" is displayed.
d) Put the object carefully on the scale pan.
e) After several seconds, the scale will become stabilized
and you can read the weight of the weighed object
on the display.
Overload
If the maximum scale load is exceeded, the display will show
the message "O_Ld".
Change of the unit
Use the button UNIT [B] to change the unit
Taring
a) Switch off the scale and put the container (where the
object to be weighed will be placed) on it.
b) Once the scale is stabilised, press the button TARE [D].
c) The display will show "0.0" and you can weigh the
objects placed in the container.
Counting the objects
a) Press the button COUNT [C] and hold it down for
several seconds.
b) Using the button UNIT [B], choose the number of
objects.
c) Put the pre-set number of objects on the scale pan.
d) Press the button COUNT [C]
e) Place the objects to be counted based on their weight
on the scale pan. Remember that the total weight
of the objects put on the scale must not exceed the
permissible device load.
Automatic switching off
The device will switch off automatically, if it is not used for
several minutes (in case of battery-operated device).
Instructions for use
• Do not leave any weights on the scale for a long time.
• Avoid extreme temperatures. The scale must not
be exposed to direct sunlight or placed near air
conditioning systems.
• Avoid strong electric or magnetic fields.
• Make sure that the scale is placed on a stable surface
and is not exposed to vibrations.
• Do not place the scale near open windows or doors, air
conditioning systems or fans that can cause unstable
measurement results due to improper air circulation.
• Keep the scale clean. Do not place any objects on the
scale if it is not used.
If the scale is not used for long periods, disconnect it from
the power supply and remove the batteries.
7
EN