Steinbach Poolrunner Battery+ Manual Del Usuario página 43

Fault description
The device cannot reach all
spots.
The device does not work and
the status indicator blinks blue.
The device does not function.
The device floats up or turns in
a circle on the bottom of the
pool.
The rechargeable battery
runtime is shorter than
expected.
If the problem cannot be solved, contact the customer service listed on the last page.
Cause
The nozzle setting is not
suitable.
The water circulation of the
pool is switched on.
The pump is running dry.
There is air in the device.
There are foreign objects in
the drive.
Too much air in the housing.
The salt content is too high
and the device has more
buoyancy.
The water circulation of the
pool is switched on.
The water temperature is too
low.
The rechargeable battery was
not completely charged.
The pool floor is not level.
Remedy
Change the setting of the
nozzles.
Switch off the filter system of
the pool.
Wait until the device is in the
water before switching it on.
Switch off the device and let all
the air escape.
Contact customer service.
Let all air escape.
Set the correct salt content.
See section "Technical data".
Switch off the filter system of
the pool.
Only use the device under the
permissible operating
conditions. See section
"Technical data".
Charge the rechargeable
battery completely.
Only use the device in pools
with a level floor.
43