Connecting And Disconnecting The Contra-Angle; Inserting And Removing The File - DENTSPLY x-smart plus Manual Del Usuario

6.5.3. Connecting and Disconnecting the Contra-angle

Connecting
The contra-angle can be connected at 6 adjustable head positions. Align the positioning pins
of the contra-angle with the positioning slots of the motor handpiece and insert the head until it
clicks (see Fig. 5).
Disconnecting
When removing the contra-angle, pull it straight out (see Fig. 5).
CAUTIONS
• When attaching and detaching the contra-angle, turn the power off beforehand.
Check that the contra-angle is securely assembled to the motor handpiece.
•

6.5.4. Inserting and Removing the File

File insertion
Insert the file into the chuck until it stops.
Lightly turn the file until it engages with the latch mechanism. Push inwards to click.
File removal
Press the push-button and pull out the file (see Fig. 6).
CAUTIONS
• When attaching and detaching the file, turn the power off beforehand.
• After the file is locked in place, lightly pull out the file to make sure the file is locked.
• Always clean the shank of the file to be installed. Allowing dirt to enter the chuck could
cause deterioration of chucking force.
FISDR-JAP / F1902124.X / 00 / 2011 – created 07/2011
Contra-angle Motor handpiece
Fig. 5
Fig. 6
- 19 / 208 -