Mopar 82212559 Instrucciones De Montaje página 6

6
29. Route the cord (3) under the coolant recovery bottle towards to the front of the driver side inner fender.
30. Install the retainer (1) into the hole on the inner front fender.
31. Using the kit supplied tape patches (2), remove the adhesive backing and secure the cord (3) to the fender panel.
32. Raise the vehicle as necessary.
33. Reposition the A/C compressor (2) to the engine.
34. Using a 13mm socket/ratchet/wrench, install the stud
(3) and the three bolts (1) that secure the A/C com­
pressor (2) to the engine. Tighten the bolts to 28 N∙m
(21 ft. lbs.).
35. Reposition the bracket (4) onto the stud and install the
retaining nut (5). Tighten the nut to 40 N∙m (30 ft. lbs.).
36. Connect the engine wire harness to the A/C compres­
sor (2).
Nov 10, 2010 K6861187