Descargar Imprimir esta página

Troubleshooting Guide - BH FITNESS G233N Manual Del Usuario

Ocultar thumbs Ver también para G233N:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
G.BODY-FAT FUNCTION
This monitor has a memory to record
SEX (Male 1 – Female 0); HEIGHT
(100 – 200 cm); WEIGHT (30 – 200
kg); AGE (10 – 100).
1. Press any key to switch the monitor
on.
2. Press the BODY FAT key and the
male figure will start flashing, use the
UP or DOWN keys to select Male or
Female.
3. Press the BODY FAT key and the
height screen will appear, (100 – 200
cm), use the UP – DOWN keys to
select your height.
4. Press the BODY FAT key and the
weight screen will appear, (30 – 200
kg), use the UP – DOWN keys to
select your weight.
5. Press the BODY FAT key and the
age screen will appear, (10 – 100),
use the UP – DOWN keys to select
your age. Press the BODY FAT key.
6. Place both hands on the hand-grip
sensors (R) and certain characters
(
) will appear on the
screen displaying your BMR (Basal
Metabolic Rate, values between 1 –
9999), BMI (Body Mass Index, values
between 1.0 – 99.9), FAT% ( Body fat
%, values between 5 – 50%), this last
value will be shown on the main
screen and the previous values on the
bottom screens.
NOTE:
If the error code "E3" is shown on the
screen then this means that you do
not
have
your
correctly on the hand-grip sensors (R).
Personal data is not stored and will be
lost when the monitor is reset or
switched off.
Refer to the following table to gauge
your BODY FAT status:
hands
positioned
REFERENCE TABLE: BODY FAT
PERCENTAGE %
SEX/
LOW
FAT%
MALE
<13% 13%-25.8%
FEMALE <23% 23%-35.8%
REFERENCE TABLE: BMI
THIN
NORMAL
<18.5 =18.5~24.9
D. BODY TYPES:
There are 9 body types based on the
percentage of fat calculated.
TYPE 1
Extremely athletic
TYPE 2
Ideal sportsman
TYPE 3
Very slender
TYPE 4
Sportsman
TYPE 5
Ideal health
TYPE 6
Slender
TYPE 7
Very overweight
TYPE 8
Overweight
TYPE 9
Extremely obese

TROUBLESHOOTING GUIDE

Problem: The display comes on but
only the Time function works
Solution:
a.- Make sure that the connection
cable is connected.
Problem: The display does not come
on or the displayed segments are very
weak
Solution:
a.- Check that the batteries are fitted
correctly.
b.- Check the battery charge
c.- If they are run down change them
immediately
11
LOW/
AVERAGE
AVERAGE
26%-30%
36%-40%
SLIGHTLY
OVERWEIGHT
=25~30
HIGH
>30%
>40%
OVER-
WEIGHT
<30

Publicidad

loading

Este manual también es adecuado para:

G233