Motorola PMLN7018 Guia Del Usuario página 13

01_EN.fm Page 11 Monday, March 28, 2016 10:08 AM
POST INSTALLATION CHECKS
Perform the following post installation checks to verify
installation integrity on PMLN6181 and PMLN6182 Vehicular
Charger Kit:
Table 1: Post Installation Checks
No. Procedure
1 Insert the TETRA
Handportable Terminal
into the cradle.
2 Turn ignition key to ON.
TROUBLESHOOTING
This section provides typical malfunctions that can occur
during the first operation of the PMLN6181 and PMLN6182
Vehicular Charger Kit. The paragraph also suggests
corrective actions.
Prior to troubleshooting the malfunction, verify the following:
• Your TETRA Handportable Terminal functions properly
outside the cradle.
• The cable to the cradle is properly connected.
Identify the malfunction in accordance to Figure 2.
Expected Result
Connection established and
charging begins.
The TETRA Handportable
Terminal displays an icon of the
battery in charging mode only if
the TETRA Handportable
Terminal is ON when
connecting to the vehicular
Charger/Holder. If the TETRA
Handportable Terminal is OFF,
the display shows an icon of the
battery in charging mode and a
"CHARGER MODE" message
appears.
Battery Charge Progress
11