Operating Specifications - Motorola PMLN7018 Guia Del Usuario

01_EN.fm Page 3 Monday, March 28, 2016 10:08 AM
OPERATIONAL CAUTION
!
a u t i o n
1. To reduce risk of injury, use only Motorola approved items
with your mobile or portable radios.
2. It is essential to mount the equipment in locations where it
will not cause any injury in the event of a collision.
3. A vehicle air bag inflates with great force. DO NOT place
objects, including communications equipment, in the area
over the vehicle air bag or in the air bag deployment area.
If the communication equipment is improperly installed
and the vehicle air bag inflates, this could cause serious
injury. If necessary, contact the vehicle manufacturer for
air bag information specific to the vehicle.
4. Verify that none of the vehicle's systems are affected by
use of the portable radio e.g. cruise control, ABS braking,
traction control, engine management, direction indicators,
lights etc.
5. Use existing openings through the bulkhead to avoid
drilling. If drilling is necessary, ensure that no damage is
incurred to the Vehicle Electronic Control Modules
(ECM's), fuel pipes, brake pipes, and/or cable looms.
6. Do not transport or store flammable gas, flammable
liquids or explosives in the compartment of your vehicle
that contains your equipment.
7. To avoid possible interference with blasting operations,
turn your radio OFF before entering an are where you
maybe close to electrical blasting caps, in a "blasting
area" or in areas posted as "Turn off two-way radios".
Obey all signs and instructions.

OPERATING SPECIFICATIONS

Vehicular Power Adaptor, VPA (NNTN8040)
Input voltage range: 10.8 to 33 VDC
Vehicular Power Module, VPM
- 0104058J87 (input voltage range: 10.8 to 16.6 VDC)
- PS000149A01 (input voltage range: 10.8 to 33.0 VDC)
3